Toro 04259 Installation Instructions Manual page 14

1
1. Groomer drive pulley
8. Remove the 2 shoulder bolts securing the
groomer drive assembly to the side plate
adapters (Figure
G016240
1. Groomer drive assembly
9. Remove the groomer drive assembly from the
bolts.
10. Remove the groomer shaft.
11. Torque the groomer drive pulley to 170 N·m (125
ft-lb).
Note:
The use of an impact gun is not enough
to ensure proper installation. Failure to properly
torque the drive pulley can result in the assembly
unscrewing itself during operation.
G16239
Figure 35
36).
Figure 36
2. Shoulder bolts
g016239
g016240
14