Loading Paper In Post Inserter Of Folding Unit Fd-503 - Konica Minolta AccurioPress C2070 Quick Manual

5.1 Loading Paper
7
Load the remaining paper into the tray, then press the rear
guide plate against the paper.
NOTICE
Be careful not to load paper above the
the height limit on the side guide plate. Otherwise, a paper
jam may occur.
To load paper with the paper width less than 182 mm /
7.165", use the small size guides built in the side guide
plates. For information about how to use the small size
guides, refer to the [HTML User's Guide].
Be sure that the rear guide plate is securely pressed
against the paper. If there is any gap between the rear guide
plate and the paper, this machine will not be able to detect
the correct paper size. It may cause a paper feeder machine
trouble.
Load paper with the print side facing up.
8
Close the tray.
% Push the tray in until it locks into place.
The amount indicator changes from
CHINE] or [COPY] screen.
NOTICE
Carefully close the tray. Otherwise, the machine may be subjected to an unexpected impact due to the
tray or paper weight, which may lead to a machine error.
5.1.3

Loading Paper in Post Inserter of Folding Unit FD-503

Select [Paper Setting] on the [MACHINE] screen or the [COPY] screen, then change the paper setting of the
upper tray or lower tray of the post inserter.
1
Load paper into the upper tray or lower tray of the post in-
serter.
The Amount indicator changes from
[MACHINE] screen or the [COPY] screen.
2
Press the tray guide plates against the paper.
NOTICE
Do not load more than 500 sheets (80 g/m
not load above the limit line indicated on the tray guide plates.
AccurioPress C2070series
,
mark that indicates
to in the tray information display area of the [MA-
to on the
2
/ 21 lb Bond) for each of the upper and lower trays. Also, do
5
5-6