Konica Minolta AccurioPress C2070 Quick Manual page 92

6.1 Both Sides Adjustment
8
Measure the line length at each of points [1] to
[8] on the printed-out chart using a scale.
% The figure on the right illustrates an example
to measure points [1] and [5]. As illustrated in
this example, measure the line length at
each printed point.
% The measurement value can be entered in
units of up to 0.1 mm.
% Write down the measured lengths so that
you do not forget them.
9
Press each point number, then enter the measured length using the keypad, [,], or [+] on the screen.
% To reset a value, press [Clear].
AccurioPress C2070series
[ 5 ]
[ 1 ]
[ 5 ]
[ 1 ] [ 2 ]
[ 6 ]
[ 3 ] [ 4 ]
6
[ 7 ]
[ 8 ]
6-18