Reset Communication Module To Factory Settings - Siemens 6ES7547-1JF00-0AB0 Manual

2.4

Reset communication module to factory settings

Effects of resetting to the factory settings
Use the "Reset to factory settings" function to restore the parameter assignments of your
IO-Link Master CM 8xIO-Link communication module made with S7-PCT to the factory state.
After a "Reset to factory settings", the parameters of the IO-Link Master CM 8xIO-Link
communication module are assigned as follows:
● The ports are in DI mode
● The ports are mapped to the relative addresses 0.0 ... 0.7
● The PortQualifier is disabled
● I&M data 1 to 3 is deleted
Note
The master backup of the IO-Link Master is deleted and the delivery condition is restored.
You should reset a removed IO-Link Master CM 8xIO-Link communication module to the
factory settings before you place it in storage.
Procedure
To perform a "Reset to factory settings", proceed as described in the S7-PCT online help.
Communication module IO-Link Master CM 8xIO-Link (6ES7547-1JF00-0AB0)
Manual, 03/2019, A5E45488510-AA
2.4 Reset communication module to factory settings
Product overview
13