Add Trust Domain - ZyXEL Communications VMG4005-B50B User Manual

Table 17 Maintenance > Remote Management > Trust Domain (continued)
LABEL
IP Address
Delete

10.3.1 Add Trust Domain

Use this screen to configure a public IP address which is allowed to access the VMG. Click the Add Trust
Domain button in the Maintenance > Remote Management > Trust Domain screen to open the following
screen.
Figure 22 Maintenance > Remote Management > Trust Domain > Add Trust Domain
The following table describes the fields in this screen.
Table 18 Maintenance > Remote Management > Trust Domain > Add Trust Domain
LABEL
IP Address
Apply
Cancel
Chapter 10 Remote Management
DESCRIPTION
This field shows a trusted host IP address.
Click the Delete icon to remove the trust IP address.
DESCRIPTION
Enter a public IPv4 IP address which is allowed to access the service on the VMG from the WAN.
Click Apply to save your changes back to the VMG.
Click Cancel to exit this screen without saving.
VMG4005-B50B User's Guide
43