I cannot access the VMG anymore. I had access to the VMG, but my connection is not available
anymore.
Your session with the VMG may have expired. Try logging into the VMG again.
1
Check the hardware connections, and make sure the LEDs are behaving as expected. See the Quick
2
Start Guide and
Turn the VMG off and on.
3
If the problem continues, contact your vendor.
4
16.4 UPnP
When using UPnP and the VMG reboots, my computer cannot detect UPnP.
Disconnect the Ethernet cable from the VMG's LAN port or from your computer.
1
Re-connect the Ethernet cable.
2
The Local Area Connection icon for UPnP disappears in the screen.
Restart your computer.
Chapter 16 Troubleshooting
Section 1.4.2 on page
10.
VMG4005-B50B User's Guide
59