Trust Domain - ZyXEL Communications VMG4005-B50B User Manual

The following table describes the fields in this screen.
Table 16 Maintenance > Remote Management > MGMT Services
LABEL
WAN Interface
used for services
service
LAN/WLAN
WAN

Trust Domain

Port
Apply
Cancel
10.3 Trust Domain
Use this screen to view a list of public IP addresses which are allowed to access the VMG through the
services configured in the Maintenance > Remote Management screen. Click Maintenance > Remote
Management > Trust Domain to open the following screen.
Note: If this list is empty, all public IP addresses can access the VMG from the WAN through
the specified services.
Figure 21 Maintenance > Remote Management > Trust Domain
The following table describes the fields in this screen.
Table 17 Maintenance > Remote Management > Trust Domain
LABEL
Add Trust
Domain
Chapter 10 Remote Management
DESCRIPTION
Select Any_WAN to have the VMG automatically activate the remote management service
when any WAN connection is up.
Select Multi_WAN and then select one or more WAN connections to have the VMG activate the
remote management service when the selected WAN connections are up.
This is the service you may use to access the VMG.
Select the Enable check box for the corresponding services that you want to allow access to the
VMG from the LAN/WLAN.
Select the Enable check box for the corresponding services that you want to allow access to the
VMG from all WAN connections.
Select the Enable check box for the corresponding services that you want to allow access to the
VMG from the trusted hosts configured in the Maintenance > Remote MGMT > Trust Domain
screen.
If you only want certain WAN connections to have access to the VMG using the corresponding
services, then clear WAN, select Trust Domain and configure the allowed IP address(es) in the
Trust Domain screen.
You may change the server port number for a service if needed, however you must use the
same port number in order to use that service for remote management.
Click Apply to save your changes back to the VMG.
Click Cancel to restore your previously saved settings.
DESCRIPTION
Click this to add a trusted host IP address.
VMG4005-B50B User's Guide
42