8 Commissioning the demo project
If you do not have available a CPU 410-5H, then configure a new automation
system. The procedure is as follows:
1. Create an AS according to your existing hardware.
2. Configure the external peripherals as shown in Chapters 4.1, 5.1.1, 5.2.1,
3. Switch to the view of the technological hierarchy and change the AS
assignment (1) of folders "PCS 7 Process", "SITOP 24 V", and
"SITOP PSU8600" to the new automation system.
Note
Changing the AS assignment in the technological hierarchy shifts the relevant
CFC plans and blocks to the new AS.
Fig. 8-2
Integration of a SITOP 24 V Power Supply in PCS 7
Entry ID: 109481908,
V1.0,
04/2016
6.1
1
und
7.1
59