Siemens SITOP PSU8200 Manual page 35

5 Uninterruptible 24 V power supply
Fig. 5-16
6
4. Copy interconnected blocks "Pcs7DiIn" and "MonDiL" to the clipboard again
and paste them into the CFC plan again. Carry out the modifications below for
monitoring the battery charge (Rel. 3):
–
Rename the monitoring block (9) to match its use. Here, the system
monitors the "Battery charge > 85%" signal.
–
Interconnect input "PV_In" with the corresponding symbol of the external
peripherals (10).
– At parameters "FlutTmIn = 0.0" and "Color = 16#0", you use the default
values.
Fig. 5-17
10
5. Compile the AS program and update the view of the CFC plan.
6. Load the program into the automation system.
Integration of a SITOP 24 V Power Supply in PCS 7
Entry ID: 109481908, V1.0, 04/2016
7
5
8
9
35