5 Uninterruptible 24 V power supply
Configuring symbols
To interconnect the driver block of the control program with a symbolic address at a
later time, parameterize the I/O addresses of the DC UPS using symbols.
The procedure is as follows:
1. Select the DC UPS (1) in the hardware configuration.
2. Highlight module "UPS1600 xxA PN" (2) on slot 0.2 and execute menu
command "Edit > Symbols...".
3. Click on the "Add to Symbols" pushbutton. This automatically adds the
standard address symbols.
4. Compile and load the hardware configuration.
Fig. 5-5
Integration of a SITOP 24 V Power Supply in PCS 7
Entry ID: 109481908,
V1.0,
2
04/2016
1
3
27