7 Power supply system SITOP PSU8600
Configuring the hardware
The procedure is as follows:
1. Drag the PSU8600 from the device catalog (1) onto the PROFINET IO system
of the AS.
2. Highlight the PROFINET IO device and drag one CNX8600 expansion module
and one BUF8600 buffer module each (2) to a free slot on the basic module. A
maximum of five slots per basic module are available.
3. Open the properties of the PSU and enter the device name (3) and the
device's IP address (4).
Fig. 7-3
Integration of a SITOP 24 V Power Supply in PCS 7
Entry ID: 109481908,
V1.0,
04/2016
1
2
3
4
50