14.6 Lens safety cable
When using the safety cable ?
The lens safety cable must be used in any circumstances to protect a mounted lens in the lens holder.
How to mount the cable
1. Put the safety cable around the lens. Make sure the cable is mounted between the motor part and the mounting flange
1
Image 14-22
Lens safety cable
1
Lens motor block
2
Mounting flange
3
Clamp
2. Insert both cable sides into the clamp;
Strap the cable and make sure that the clamp is positioned on 45° from the bottom to avoid interference of the cable with the
lens locking mechanism.
Secure the cable by fixating the nut of the clamp.
R5905312 HDF W SERIES 24/01/2013
2
3
14. Lenses and Lens Holder
3
223