Lens Safety Cable (Optional) - Barco HDF W22 Installation Manual

3. Physical installation
3.2.5

Lens safety cable (optional)

When using the safety cable ?
The lens safety cable can be used in any circumstances to protect a mounted lens in the lens holder.
How to mount the cable
1. Put the safety cable around the lens. Make sure the cable is mounted between the motor part and the mounting flange
1
Image 3-23
Lens safety cable
1 Lens motor block
2 Mounting flange
3 Clamp
2. Insert both cable sides into the clamp;
Strap the cable and make sure that the clamp is positioned on 45° from the bottom to avoid interference of the cable with the
lens locking mechanism.
Secure the cable by fixating the nut of the clamp.
36
2
3
3
R5905158 HDF W SERIES 01/06/2012