Frequency/Voltage Control - ECS RS482M-M Manual

48
System Component Characteristics
These fields provide you with information about the systems current operating status. You
cannot make changes to these field.
• CPU Vcore
• VDIMM
• +5v
• Voltage
• VBAT
• CPU Tcontrol
• System Temperature
• CPU/SYSTEM Fan Speed

Frequency/Voltage Control

This item enables you to set the clock speed and system bus for your system. The clock
speed and system bus are determined by the kind of processor you have installed in your
system.
NPI Fid control
NPI Vid control
AMD K8 Cool & Quiet control
Auto Detect PCI Clk
Spread Spectrum
CPU Clock
DIMM Voltage Adjust
NPT Fid control (Auto)
This item allows users to adjust the CPU frequency; the range willbe varied according to the
different CPUs. We strongly recommend you leave this item at its default value.
NPT Vid control (Auto)
This item allows users to adjust the CPU voltage. We strongly recommend you leave this
item at its default value.
AMD K8 Cool&Quiet control (Auto)
This item helps the system to lower the frequency when CPU idles. When the frequency
decreases, the temperature will drop automatically as well.
Auto Detect PCI Clk (Enabled)
When this item is enabled, BIOS will disable the clock signal of free PCI slots.
Spread Spectrum (+/- 0.3%)
If you enable spread spectrum, it can significantly reduce the EMI (Electro-Magnetic
Interference) generated by the system.
CPU Clock (200 MHz)
This item allows users to manually adjust the CPU clock.
DIMM Voltage Adjust (1.9V)
Use this item to manually adjust the DIMM voltage, from.
Press <Esc> to return to the main menu setting page.
Phoenix-Award WorkstationBIOS CMOS Setup Utility
Frequency/Voltage Control
[Auto]
[Auto]
[Auto]
[Enabled]
[+/- 0.3%]
[200 MHz]
[1.9 V]
: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1: General Help
F5:Previous Values F6:Fail-Safe Defaults
Using BIOS
Item Help
Menu Level
F7:Optimized Defaults