Table of Contents
Advertisement
Available languages
Available languages
14
CPU Installation Procedure
The following illustration shows CPU installation components.
1
Install your CPU. Pull up the lever away from the
socket and lift up to 90-degree angle.
2
Locate the CPU cut edge (the corner with the pin
hold noticeably missing). Align and insert the CPU
correctly.
3
Press the lever down and apply thermal grease on
top of the CPU.
4
Put the CPU Fan down on the retention module and
snap the four retention legs of the cooling fan into
place.
5
Flip the levers over to lock the heat sink in place and
connect the CPU cooling Fan power cable to the
CPUFAN connector. This completes the installa-
tion.
To achieve better airflow rates and heat dissipation, we suggest that you use
a high quality fan with 4800 rpm at least. CPU fan and heatsink installa-
tion procedures may vary with the type of CPU fan/heatsink supplied. The
form and size of fan/heatsink may also vary.
Installing the Motherboard
Advertisement
Table of Contents
