Frequency Voltage Control Option - ECS P6IWT-Me Manual

Frequency Voltage Control Option

This item allows you to set the clock speed and system bus for your
system. The clock speed and system bus are determined by the kind of
processor you have installed in your system.
Auto Detect DIMM/PCI Clk
When this item is enabled, BIOS will disabled the clock signal of free DIMM and
PCI slots.
CPU Internal Core Speed
Use this item to automatically set up the mainboard for the kind of processor that
you have installed. Set this item to the rated internal clock speed of the installed
processor. If you set this to Manual, two new items appear:
CPU/DRAM/SPECTRUM Freq. and CPU Core: Bus Freq.Multiple.
CPU/DRAM/SPECTRUM Freq.
CPU Core: Bus Freq. Multiple
These items appear if you have set the CPU Internal Core Speed to Manual. Use
the CPU Host Bus Frequency to set the system bus frequency for the installed
processor (usually 100 MHz or 66 MHz). Then use CPU Frequency to set a
multiple. The multiple times the system bus must equal the core speed of the
installed processor e.g. 3.5 (multiple) x 100 MHz (system bus) = 350 MHz
(installed processor clock speed).
Default: Disabled
Default: 300 MHz
59