ECS RS482M-M Manual page 51

Resume by PCI-E PME (Enabled)
This system can be turned off with a software command. If you enable this item, the
system can automatically resume if there is an incoming call on the PCI Express card.
You must use an ATX power supply inorder to use this feature. Use this item to do wake-
up action if inserting the PCI Express card.
Resume by USB (S3) (Enabled)
This option allows the activity of the USB devices to wake up the system from S3 sleep
state.
Resume by WOL (Disabled)
This option allows the activity of the mouse device to wake up the system from sleeping
status.
Resume by PS2 MS (S3) (Disabled)
This item enables or disables you to allow mouse activity to awaken the system from
power saving mode.
• Resume By Hot Key (Ctrl-F1): Use this item to define the password when
using the keyboard "hot key" to resume the system.
RTC Alarm Resume (Disabled)
When set to Enabled, additional fields become available and you can set the date (day of
the month), hour, minute and second to turn on your system. When set to 0 (zero) for
the day of the month, the alarm will power on your system every day at the specified
time.
• Date of Month: Use this item to define the date of month when using the RTC
alarm to resume the system.
• Resume Time (hh:mm:ss): Use this item to define the time when using the
RTC alarm to resume the system.
Press <Esc> to return to the Power Management Setup screen.
Using BIOS
45