Installation Sequence Siting And Levelling The Boiler - Viessmann Vitocrossal 200 CM2 Series Installation Instructions Manual

Siting and levelling the boiler
Required parts:
■ Adjusting screws are supplied with the boiler.
A
!
Please note
Damage to the flue gas connection can result in
leaks.
Never lift or move the boiler by the flue outlet.
B C
A
Fig. 7
Note
Use holes and in the boiler floors to attach lifting
B C
tackle.
1. Insert adjusting screws
above.
C B
1.
into the base rails from
A
Note
The installation room must be equipped with a suitable
condensate drain (maximum 50 mm above floor level)
if the boiler is installed at ground level.
2.
2. Level the boiler horizontally. Special foundations
are not required.
Note
We recommend installing the boiler on adjustable
anti-vibration feet (accessories).
Insert adjustable feet into the base rails from
below.
13