Installation Sequence Siting And Levelling The Boiler - Viessmann Vitocrossal 300 Installation Instructions For Contractors

Siting and levelling the boiler
Note
Lifting eyes are welded to the top of the boiler for
attaching the lifting gear. Alternatively, use the speci-
fied holes in the boiler floor.
C
B
A
Fig. 5 Lifting gear attachment points:
Lifting the complete appliance
A
Lifting the combustion chamber module
B
Lifting the heat exchanger module
C
Note
If required, base frame
module can be removed to facilitate handling; see
B
page 10.
When refitting the base support, tighten the four
screws with 70 Nm torque.
8
A
C
B
D
and combustion chamber
D
!
Please note
Risk of crushing and injury.
Secure the combustion chamber module to pre-
vent it from falling.