Repositioning The Boiler Door Hinges (If Required); Closing The Boiler Door - Viessmann Vitocrossal 200 CM2 Series Installation Instructions Manual

Fitting the thermal insulation and casing...
(cont.)

Repositioning the boiler door hinges (if required)

A
B
C
B
D
Fig. 10
The boiler door can be rehung on the opposite side by
moving bolt to the r.h. side. Sealing frame
A B
should press centrally onto boiler door gasket when
D
the boiler door is closed. If necessary, align mounting
bracket
C

Closing the boiler door

1.
Fig. 11
Tighten the six M12 screws in the boiler door evenly
and diagonally. Torque: 40 Nm
15