Table of Contents
Advertisement
Avaya 1030 Components
Your Avaya 1030 package contains the following components:
•
One of the following audio components:
-
Avaya Video MicPod 1000—see "Optional Peripherals" on page 19 for the dual
Avaya Video MicPod 1000 option
-
Avaya Video Conference Phone 1000
•
Avaya Video Camera 200 with standard 3 meter (9.8 foot) cable
•
Avaya 1030 Codec
•
Avaya Remote Control (including three AAA batteries)
•
Quick reference card
•
Documentation CD
Installing Avaya 1030
Before you install an Avaya video communications system, read the document Avaya Safety
and Regulatory Notices for important safety information. The document is available on the
documentation CD-ROM and from support.avaya.com.
Warning:
Exercise care when connecting cables to the codec to avoid damaging
cables or the connectors on the codec. Face the back of the codec or ensure that all
connectors are visible when connecting a cable to the codec.
To install the components of your Avaya system, remove all components from the product
packaging, including cables, and place them in the desired positions in your conference
room.
Warning:
Do not place anything on top of or adjacent to the codec that can obstruct
air flow around the unit or generate heat. Doing so can cause the system to overheat
and reboot. Prolonged overheating can result in damage to the codec. Ensure the room
that houses the codec is properly ventilated and temperature controlled.
Refer to the Avaya quick reference card included with your system for a visual depiction of
the proper setup. The numbers that appear on the quick reference card correspond to the
following steps:
13
Avaya 1030 Installation Guide
Advertisement
Table of Contents
