Receiving; Automatic Receiving Mode; Manual Receiving Mode; Selecting The Receiving Mode - Toshiba DP125F Operator's Manual

- RECEIVING

Automatic
Receiving Mode
"Auto Reception" is the ability of "Manual Reception" allows you
the facsimile to receive docu- to use the facsimile as a tele-
ments sent to your facsimile au- phone (talking function) first and
tomatically. then start a document reception
by pressing:
The facsimile starts to receive a
document after a pre-selected
number of rings. You can
change the ringer count (see
page 68).
1. When the facsimile rings,
NOTE:
A ring delay can be selected
should you wish to speak to
the calling party before re-
2. If you hear the facsimile tone
ceiving a facsimile.
If you do not pick up the
handset within the selected
delay period, the facsimile
will automatically answer the
call and attempt to receive a
document.
3. Replace the handset to the
112
Manual Selecting the
Receiving Mode Receiving Mode
The Automatic Receiving Mode
(AUTO RECEIVE) is normally
selected. You can change the
receiving mode from Automatic
to Manual, or vice versa.
Refer to Receive Mode Selec-
tion on page 68.
pick up the optional handset
and talk with the remote
party.
through the handset instead
of operator's voice, you may
manually initiate a facsimile
reception by pressing:
cradle. The facsimile will
start receiving the document.