Copying; Paper Size For Copying - Toshiba DP125F Operator's Manual

- COPYING

Paper Size for Copying

You can utilize the DP120F/DP125F as a convenient copier to make collated copies of
original documents. The following are key points when making copies.
Recording Paper Size
The paper sizes usable with your fax unit are limited to Letter or Legal size. The
received document is recorded (printed) within the Effective Recording Area of the
paper.
Effective
Recording
C D
Area
B
A
NOTES:
• When AUTO is selected as the Paper Tray setting, you cannot select AUTO for
Reduction setting.
• When AUTO is selected as the Paper Tray setting, the paper is not supplied
from the tray specified for Letter Head Paper or Separator Page. However, you
can select a tray manually by selecting the Paper Tray.
• The following copy resolutions are available:
FINE
U-FINE
94
Paper Size A B C D
Letter: mm
216 209 273 279
inches 8.5 8.2 10.7 11.0
Legal: mm 216 209 350 356
inches
8.5 8.2 13.8 14.0
FINE+HALFTONE
U-FINE+HALFTONE
At the time of copying, the COLLATE function may be selected. This function will sort
multiple page copies into sets of correct-order pages.
Output Examples of Printed Copies
With COLLATE Function ON
Page 3
Page 2
Page 1
Page 3
Page 2
Page 1
Page 3
Page 2
Page 1
NOTES:
• The pages are automatically col-
lated.
• Requires enough memory for the
entire multi-page document. If
there is not enough memory
(memory overflow), the copying
procedure will be canceled.
• Collation is slower than non-colla-
tion because the entire document
must be scanned into memory
first, then printing can occur.
With COLLATE Function OFF
Page 1
Page 1
Page 1
Page 2
Page 2
Page 2
Page 3
Page 3
Page 3
NOTES:
• Collating is the responsibility of
the operator.
• Memory requirements are limited
to one page at a time.