Toshiba DP125F Operator's Manual page 273

Browse Folders - continued
Changing the Device Configuration - continued
2
Change the TOSHIBA Viewer settings
2a
Change the device settings
Click on Device tab.
Check on Print and/or Scan if you want the DP120F/DP125F to
be worked as a printer and/or scanner using the TOSHIBA Viewer.
When you want to change the port, go to Step 2b.
When you want to configure the device settings, click on Setup...
and go to Step 3.
When you want to save changes, click on OK.
2b
Change the port
Click on Port tab.
Select the port that your computer connects to your DP120F/
DP125F.
Click on OK to save changes.
271