Advertisement
Table 1: Rack Specifications
Specification
Approximate Empty Weight
Dynamic Load (Rolling Load)
Total Maximum Configuration
Seismic Certified
Height
Width
Depth
CAUTION: Depending on the rack configuration, it may be supplied with native built-in extendable outriggers with small floating
supplemental casters as motion anti-tip features. They must all be extended into a latched position before and during cabinet
movement or relocation. These native built-in outriggers must not be removed completely, but rather recessed in when finished to
ensure they are readily available for future use. (C050)
The equipment shall be installed or serviced by trained service personnel in accordance with the applicable requirements of the National
Electrical Code, ANSI/NFPA 70 or Canadian Electrical Code and the applicable sections of ANSI C2, the National Electrical Safety Code.
Units
366 lbs. (166 kg)
2500 lbs. (1134 kg)
40 lbs. (18 kg) per rack "U"
3700 lbs. (1678 kg)
70 lbs. (32 kg) per rack "U"
2580 lbs. (1170 kg)
45 lbs. (20 kg) per rack "U"
79.5 in. (2020 mm)
23.6 in. (600 mm)
42.1 in. (1070 mm)
Advertisement
