Setting Up The Audio Options; Digital Output; Dts; Dynamic Compression - Toshiba D-VR3SG Owner's Manual

On-Screen Menu
With the DVD in Stop mode, press the MENU
1
button on the remote control.
2
Select "Setup" using buttons, then press
the or OK button.
3 Select "Language" using buttons, then
press the or OK button.
Language setup menu will be displayed.
Programme
4 Use buttons to select the "On-Screen
Menu" and press the or OK button.
Programme
38 - English
5 Use the buttons to select On-Screen Menu
Language.
Language
Audio : Original
Subtitle
: Automatic
Disc Menu English
Programme
Français
On-Screen Menu
Deutsch
Español
Italiano
Nederlands
6
Press the or OK button.
• On-Screen Menu is selected and the screen
returns to Language Setup menu.
Setting Up the Audio
Options
Allow you to setup the Audio device and sound status
depending on the audio system in use.
1 With the DVD in Stop mode, press the MENU
button on the remote control.
2
Select "Setup" using buttons, then press
the or OK button.
3 Select "Audio" using buttons, then press
the or OK button.
Audio setup menu will be displayed.
Programme
4
Use buttons to select the desired sub menu
and press the or OK button.
PCM
Bitstream
Programme
5 Use the buttons to select the desired item.
Then press the or OK button.
Press the RETURN or button to return to
the previous menu. Press the MENU button to
Note
exit the menu.

Digital Output

1. PCM : Converts to PCM(2CH) 48kHz audio.
Select PCM when using the
Analogue Audio Outputs.
2. Bitstream : Converts to Dolby Digital/MPEG
Bitstream (5.1CH). Select Bitstream
when using the Digital Audio Output.

DTS

1. Off : Doesn't output digital signal.
2. On : Outputs DTS Bitstream via digital out-
put only. Select DTS when connecting
to a DTS Decoder.
When DTS soundtrack is played, sound does
output from Analog Audio Output.
Note

Dynamic Compression

1. On : To select dynamic compression.
2. Off : To select the standard range.
English - 39