Changing The Preset Manual Setup Table; Selecting The Rf Out Sound Mode - Toshiba D-VR3SG Owner's Manual

Press the buttons to select a PR number
5
as required then press or OK button to select.
Edit
Delete
Swap
6 Press the button to select Delete.
Then press OK button to delete.
PR.03
Do you want to delete 'PR.03'?
Edit
Delete
Yes No
Swap
7 Press the buttons to select Yes, and then
press the OK button.
Repeat the same procedure from Step 5
8
onwards until all the required stations have been
cleared.
On completion, press the RETURN button four
9
times to exit the menu.
32 - English
Changing the Preset
Manual Setup Table
You can rearrange the Manual Setup Table and give dif-
ferent programme numbers to the manual setup listed
according to your own preferences.
1 Open "MENU"
With the DVD in Stop mode, press the MENU
button.
2 Select "Setup"
Using the buttons, move the selection bar
to "Setup" then press or OK button to select.
Select "Install"
3
Using the buttons, move the selection bar
to "Install", then press or OK button to select.
Programme
4 Select "Manual Setup"
Move the selection bar to "Manual Setup" using
the buttons then press or OK button to
select.
TV System : G
Programme
: Ch 36
Press the buttons, until the required preset
5
TV programme is selected then press or OK
button to select.
Edit
Delete
Swap
6 Press the or button to select Swap.
To change the programme number assigned to a
station press the OK button on the remote con-
trol.
• For example, to move a TV station in pro-
gramme 1 to programme 3).
7
Press the buttons to select required posi-
tion. And then press OK button again to swap the
position.
On completion, press the RETURN button four
8
times to exit the menu.
Selecting the RF OUT
Sound Mode (B/G-D/K)
You can choose the sound mode (B/G or D/K) according
to the TV set connected to your VCR.
1 Open "MENU"
With the DVD in Stop mode, press the MENU
button.
Select "Setup"
2
Using the buttons, move the selection bar
to "Setup" then press or OK button to select.
Select "Install"
3
Using the buttons, move the selection bar
to "Install", then press or OK button to select.
Select "TV System"
4
Move the selection bar to "TV System" using the
buttons then press or OK button to
select.
TV System : K
G
Programme
: CH 36
K
5
Press the or buttons to select G or K and
then press the OK button.
On completion, press RETURN to exit the menu.
6
English - 33