Creating A Playlist Entry - Toshiba D-VR3SG Owner's Manual

Press the OK button at the end point.
7
The image and time at the end point are
8
displayed the end point window.
54
02/JAN/2004 12:00 PR2
02/JAN/2004 12:00
End 00:02:08
9 Press the buttons to select Delete, and
then press the OK button.
• Message "Do you want to delete?" will be
displayed.
• If you want to cancel, press RETURN button to
return to the Title List screen.
54
End 00:02:08
10 Press the buttons to select yes and than
press the OK button.
11 Press the MENU button to exit the menu after
the operation is finished.
The Title List screen will disappear.
The length of the selection to delete should be
at least 5 seconds long.
Note
If the length of the section to delete is less
than 5 seconds, you will be prompted with the
message "The range is too short".
If the end time precedes the start time, you
will be prompted with the message "End point
cannot be marked earlier than start point".
92 - English

Creating a Playlist Entry

DVD-RAM DVD-RW
VR mode
Follow these directions to create a new playlist entry
from a recorded title.
Insert the recorded disc.
1
Press the MENU button when the disc is
stopped.
Press the buttons to select Playlist, and
2
then press the or OK button.
Playlist
Disc Manager
Programme
Press the buttons to select New Playlist,
3
and then press the or OK button.
• The Make Scene screen is displayed.
Play List : The Playlist is a unit of playback,
that is created by selecting a
Note
desired scene in the Title List. Since
only the information necessary for
playing a desired scene is included
in a playlist, even if that playlist is
deleted, the original data will not be
deleted.
Select the start point of the section from which
4
you want to create a new scene using the play-
back related buttons, and then press the II
button.
• Playback related buttons: II , l , l ,
,
Scene No.001
01/JAN/2004 12:00
Press the buttons to select Start, and then
5
press the OK button.
• The image and time at the start point are
displayed on the Start window.
• The yellow-colored selection bar moves to the
End item.
Scene No.001
01/JAN/2004 12:00
Search the end point of the section from
6
which you want to create a new scene using
the playback related buttons, and then press
the II button.
Press the OK button to select END point.
7
• The image and time at the end point are
displayed on the End window.
• The yellow-colored selection bar moves to the
Make item.
Scene No.001
01/JAN/2004 12:00
Press the OK button to confirm.
8
• A new make scene screen is displayed.
• Scenes to be made will be added to the current
playlist.
• Repeat the above steps to make more than
one scene.
If you want to make a new playlist, go to the
beginning of step1.
Note
You can check and see all the scenes on Edit
scene screen. (see page 95)
If you want to cancel. press the buttons to
9
select RETURN, and then select the OK button.
• The Edit Playlist screen is displayed.
Press the MENU or RETURN button to exit the
10
menu.
• The Playlist screen will disappear.
You can create up to 99 playlist entries.
Note
English - 93