Setting The Vcr Output Channel; Setting Up The Language Features; Audio - Toshiba D-VR3SG Owner's Manual

Setting the VCR Output
Channel
1 Open "MENU"
With the DVD in Stop press the MENU button.
Select "Setup"
2
Using the buttons, move the selection bar
to "Setup" then press OK to select.
3 Select "Install"
Using the buttons, move the selection bar
to "Install", then press OK to select.
Programme
Select "VCR Output CH"
4
Move the selection bar to "VCR Output CH"
using the buttons then press OK to select.
Install
Auto Setup
Ch 35
Ch 36
Manual Setup
Ch 37
TV System
Programme Ch 38
VCR Output CH
Ch 39
Ch 40
Ch 41
34 - English
Select the required output channel (Ch21~Ch69)
5
by pressing the or button then press OK to
Select.
Ch21 ..Ch36 ..Ch69
On completion, press RETURN button four times
6
to exit the menu. Then tune your television again.
Setting Up the
Language Features
If you set the player menu, disc menu, audio and subtitle
language in advance, they will come up automatically
every time you watch a movie.

Audio

With the DVD in Stop mode, press the MENU
1
button on the remote control.
2
Select "Setup" using buttons, then press
the or OK button.
Programme
Select "Language" using buttons, then
3
press the or OK button.
Language setup menu will be displayed.
4 Use buttons to select the "Audio" and press
the or OK button.
Programme
5 Select the desired Language using buttons,
then press the or OK button.
Press the RETURN or button to return to
the previous menu. Press the MENU button to
Note
exit the menu.
English - 35