Setting The Date And Time; Presetting The Stations Automatically - Toshiba D-VR3SG Owner's Manual

Setting the Date
and Time
Your DVD Recorder-VCR contains a 24-hour clock and
calendar used to:
• Automatically stop programme recording
• Preset your DVD Recorder-VCR to record a pro-
gramme automatically You must set the date and time
• You must set the date and time when you purchase the
DVD Recorder-VCR
• Do not forget to reset the time when you change clocks
from winter to summer time and vice versa.
With the unit in Stop mode, press the MENU
1
button.
Programme
Programme ShowView
ShowView Extended : Off
2
Using the buttons, move the selection bar
to "Setup" then press OK to select.
3 Select "Clock Set" using the buttons, then
press the or OK button.
Programme
28 - English
4 Press to select the hour, minutes, day,
month and year.
5 Press the button to increase or decrease the
value.
• The day of the week is displayed automatically.
• You can hold the buttons down to scroll
more quickly through the values.
Programme
/
6 Press OK button, then the date and time will be
saved, if you don't press OK button, it will not be
saved.
On completion, press RETURN to exit the menu.
7
You must have the aerial connected to set the
Auto Clock. Connecting the RF Cable On
Note
page 18.
Presetting the Stations
Automatically
You do not need to preset the stations if you have
already set them automatically (see Plug & Auto Set Up
on page 27).
Your DVD Recorder-VCR contains a built-in tuner used
to receive television broadcasts.
You must preset the stations received through the tuner.
This can be done:
• Plug & Auto Set up (see page 27)
• Automatically
• Manually (see page 30)
Open "MENU"
1
With the DVD in Stop press the MENU button.
Select "Setup"
2
Using the buttons, move the selection bar to
"Setup" then press or OK to select.
3 Select "Install"
Using the buttons, move the selection bar
to "Install", then press or OK to select.
Programme
Select "Auto Setup"
4
Move the selection buttons to "Auto Setup"
then press or OK button to select from the
following options:
Programme
TV System : G
36
5 Select "Country " using the buttons to
select your country.
Auto Setup
Country Selection
Others
MOVE OK EXIT
Press OK button.
6
A message appears, indicating that any channels
already preset on the DVD Recorder-VCR will be
deleted.
Programme
Press [OK] to continue
[Menu] to exit
Press OK to start the auto
7
scaning.
• The first frequency band is scanned and the first
station found is displayed and stored. And the
DVD Recorder-VCR searches for the second
station and so on.
• When the automatic scanning procedure has
finished, the DVD Recorder-VCR switches
automatically to programme 1.
• The number of stations automatically stored by
the DVD Recorder-VCR depends on the num-
ber of stations that it has found.
Programme
English - 29