Setting The Image Quality; Brightness; Setting The Audio; Drc - Toshiba D-VR4 Owner's Manual

Various settings
Setting the image quality / Setting the audio
This section describes image quality settings.
Preparation:
• Turn ON the TV and set it to the video input mode.
• Select "AV SETUP 2" in "AV SETUP". For the proce-
dure, see steps 1 to 3 in "Using the SETUP MENU"
on page 23.
SETUP MENU
TIMER REC SET
SYSTEM SETUP
AV SETUP
REC SETUP
CH SETUP
OTHER
SELECT
ENTER ENTER RETURN

BRIGHTNESS

You can control the brightness level of the image.
Select "BRIGHTNESS" and select the level from the
below.
MAX: The image becomes brighter.
STD: The image is of standard brightness.
MIN: The image becomes darker.
E.B.L.
To select the black level of playback pictures, set your
preference and monitor's ability.
ON: Enhanced grey scale (0 IRE cut off)
OFF: Standard grey scale (7.5 IRE cut off)
Note:
The E.B.L. function only works when playing back DVD-
Video, DVD-RAM/RW/R or Video-CDs.
30
2G10101A P22-P32
AV SETUP 2
BRIGHTNESS STD
OFF
E.B.L.
BACK SETUP END
30
This section describes audio settings.
Preparation:
• Turn ON the TV and set it to the video input mode.
• Select "AUDIO" from "AV SETUP". For the procedure,
see steps 1 to 3 in "Using the SETUP MENU" on page
23.
SETUP MENU
TIMER REC SET
SYSTEM SETUP

DRC

AV SETUP

VIRTUAL SURROUND

EXTERNAL AUDIO INPUT

REC SETUP
SAP
CH SETUP
OTHER
SELECT
ENTER ENTER RETURN
DRC
DRC (Dynamic Range Control) enables you to control
the dynamic range so as to achieve a suitable sound
for your equipment.
Select "DRC" and select the level from the below.
MAX: Full dynamic range is maintained.
STD: Full dynamic range is reduced.
TV: Dynamic range is reduced.
NOTES:
• This function works only during playback of Dolby
Digital recorded discs.
• When you listen to the sound from TV's speaker, we
recommend that you select "TV".
• The level of Dynamic Range Reduction may differ
depending on the DVD.
VIRTUAL SURROUND (Spatializer N-
2-2 TM )
Sound that is not recorded in the surround mode will
be changed to artificial surround sound and output.
Select "VIRTUAL SURROUND" and select "ON" to ac-
tivate the virtual surround function. To not use the vir-
tual surround, select "OFF".
NOTE:
This function does not work with a video tape.
EXTERNAL AUDIO INPUT
The audio mode for the audio input jack can be se-
lected, choosing either stereo or monaural.
Select "EXTERNAL AUDIO INPUT" and select from the
below.
STEREO: The sound is treated as stereo sound.
L CH: The sound is treated as the monaural
sound of the left channel.
R CH: The sound is treated as the monaural
sound of the right channel.
2/25/05, 1:30 AM
AUDIO
STD
OFF
STEREO
OFF
BACK SETUP END