Basic Recording And One-Touch Timer Recording (Otr); Setting Bilingual Recording Audio - Toshiba DVR70DTKF2 Owner's Manual

E9TK2FD_EN.book Page 32 Wednesday, July 29, 2009 12:16 PM

Setting Bilingual Recording Audio

Video
DVD-RW DVD-RW DVD-RW DVD-R DVD-R DVD-R DVD+RW DVD+RW DVD+RW
You can select either "Main" or "Sub" audio to record a
bilingual broadcast in video mode or +VR mode.
This setting is only for recording analogue channel.
1
In stop mode, press [SETUP]. Select "General
Setting" using [K L], then press [ENTER OK].
2
Select "Recording" using [K L], then press
[ENTER OK].
3
Select "Bilingual Recording Audio" using
[K L], then press [ENTER OK].
4
Select "Main" or "Sub" using [K L], then
press [ENTER OK].
Bilingual Recording Audio
Main
Sub
5
Press [SETUP] to exit.
Note
• If you want to record onto a VR mode disc, both "Main" and
"Sub" will be recorded regardless of your setting here. And
when you play back, you can choose either audio format or a
combination of both as your playback audio.
Recording Audio Select (XP)
Video VR
DVD-RW DVD-RW DVD-RW DVD-RW DVD-RW DVD-RW DVD-R DVD-R DVD-R
You can enjoy high quality sound recording. This function
works only when the recording mode is set at XP.
1
In stop mode, press [SETUP]. Select "General
Setting" using [K L], then press [ENTER OK].
2
Select "Recording" using [K L], then press
[ENTER OK].
3
Select "Recording Audio Select (XP)" using
[K L], then press [ENTER OK].
4
Select "PCM" or "Dolby Digital" using [K L],
then press [ENTER OK].
Recording Audio Select (XP)
PCM
Dolby Digital
PCM: Records PCM audio for the best quality
sound.
Dolby Digital: Records Dolby Digital audio for good
quality sound.
5
Press [SETUP] to exit.
Note
• "PCM" stands for Pulse Code Modulation. It changes
analogue sound to digital sound without compressing audio
data.
• When the recording mode is set at other than XP, the unit
records "Dolby Digital" audio automatically even if you
selected "PCM".
32
EN
Basic Recording and One-touch Timer
DVD+R DVD+R DVD+R Recording (OTR)
DVB
Video
DVD-RW DVD-RW DVD-RW
Follow the steps below to record a TV programme.
(See page 70 for VHS recording.)
1
Press [
Turn on the TV and be sure to select the input to which the
unit is connected.
2
Press [DVD].
3
Press [OPEN CLOSE A] to open the disc tray.
4
Place the disc on the disc tray with its label
facing up. Be sure to align the disc with the disc
tray guide.
5
Press [OPEN CLOSE A] to close the disc tray.
6
Select the recording mode using [REC MODE].
DVD+RW DVD+RW DVD+RW DVD+R DVD+R DVD+R
(See page 28.)
7
Press [INPUT SELECT
analogue or external input mode, then select
the desired channel to record using
[PROG.
8
Basic Recording:
Press [REC I] to start recording.
The "I" mark will be displayed on the TV screen briefly.
To pause the recording, press [PAUSE F]. Press
[PAUSE F] or [REC I] again to restart the recording.
One-touch Timer Recording (OTR):
This is a simple way to set the recording time in blocks of
30 minutes. Check that the disc you are recording onto
has enough space remaining for the time you set. (See
page 71 for VHS recording.)
Press [REC I] repeatedly until the desired
recording time (30 minutes to 8 hours) appears
on the TV screen.
One-touch Timer Recording will start.
ANALOG
VR
DVD-RW DVD-RW DVD-RW DVD-R DVD-R DVD-R DVD+RW DVD+RW DVD+RW
ON STANDBY] to turn on the unit.
Disc tray guide
] to select DVB,
] or [the Number buttons].
0:30
Normal
1:00
Recording
8:00 7:30
DVD+R DVD+R DVD+R