General Copying Procedures; Initial (Default) Settings - Toshiba E-STUDIO E-Studio 3511 Operator's Manual

3. GENERAL COPYING PROCEDURES

After placing or confirming paper in the drawers, place the originals. When the [START] button is pressed
with any settings unchanged, copies are made in the initial (default) settings. You can make copies as
desired by setting different copy modes.

Initial (default) Settings

The copy modes that are automatically set when the power is turned on, when the energy-saving mode is
cleared or when the [FUNCTION CLEAR] button is pressed on the control panel are called the initial
(default) settings. The initial setting when installing the equipment is as follows:
* The initial setting can be changed. See the [User Functions Guide] for details.
item
Black-and-white/color mode
Reproduction ratio
Copy quantity
Paper selection
Original Copy
Exposure
Image quality
Finishing mode
Installing the reversing automatic document feeder
(optional):
Copying Procedure
1
Place paper in the drawer(s).
- "Changing the Paper Size of the Drawer"
- "Acceptable Copy Paper Types and Sizes"
When the desired paper is not placed in any of the drawers or the
feeder:
- Setting the drawer "Changing the Paper Size of the Drawer/
Setting the Drawer for Special Uses"
- "Bypass Copying"
Page 40
Page 38
Page 40
Page 60
Initial (default) setting
Black mode
100%
1
Automatic paper selection
1-sided 1 sided
Auto Exposure
TEXT/PHOTO mode
Placing original on the original glass:
Non-sort/non-staple mode
Placing the reversing automatic document feeder
(optional): Sort mode
Continuous original feed mode
2
53