General Copying Procedures - Toshiba E-studio 200L Operator's Manual

1. GENERAL COPYING PROCEDURES

After placing or confirming paper in the drawers, place the originals. When the [START] button is pressed
with any settings unchanged, copies are made in the initial (default) settings. You can make copies as
desired by setting different copy modes.
2
Initial (default) Settings
The copy modes that are automatically set when the power is turned on, when the energy-saving mode is
cleared or when the [FUNCTION CLEAR] button is pressed on the control panel are called the initial
(default) settings. The initial setting when installing the equipment is as follows:
* The initial setting can be changed. See the [User Functions Guide] for details.
item
Reproduction ratio
Copy quantity
Paper selection
Original Copy
Exposure
Image quality
Finishing mode
Installing the reversing automatic document feeder
(optional):
Copying Procedure
1
Place paper in the drawer(s).
- "Changing the Paper Size of the Drawer"
- "Acceptable Copy Paper Types and Sizes"
When the desired paper is not placed in any of the drawers or the
feeder:
- Setting the drawer "Changing the Paper Size of the Drawer/
Setting the Drawer for Special Uses"
- "6.BYPASS COPYING"
48
2.HOW TO MAKE COPIES
Initial (default) setting
100%
1
Automatic paper selection
1-sided
Auto Exposure
TEXT/PHOTO mode
Placing original on the original glass:
Non-sort/non-staple mode
Placing the reversing automatic document feeder
(optional): Sort mode
Continuous original feed mode
Page 38
Page 35
Page 38
Page 61
1 sided