And Sinumerik 840/840C - Siemens SINUMERIK 840 Planning Manual

11.92
9.3 Operating example turning
for SINUMERIK 880/880 GA 2 and SINUMERIK 840/840C
The operating example is supplied on floppy disk. The floppy disk includes detailed information
concerning the operating example in a Wordstar file. The general documentation on the tool
management therefore only deals with the screen forms. Softkey assignment on the
SINUMERIK 880/880 GA2 and SINUMERIK 840/840C may differ slightly (880/880 GA2
5 softkeys, 840/840C 7 softkeys).
9.3.1 Overview
Example:
Turning machine
Belegung Turret
Revolver assignment
5) 6) 7) 8)
Change tool
data
part 1
13) 14) 15) 16)
Change tool
data
part 2
21) 22) 20)
_______
1) Turret assignment
2) Search for T No.
3) Load turret
4) Unload turret
5) Change tool data
6) Change location data
7) Tool selection
8) Enable turret transfer
9) Unload tool marking
10) Reset/END
11) Selection
12) START
© Siemens AG 1991 All Rights Reserved
SINUMERIK 840/880 (PJ)
Standard
display
Selection tool
management
1) 2) 3) 4)
Loading from
NC program
9) 10)
Change
location data
part 1
17) 18) 19)
Change
location data
part 2
23) 24)
13) Display next cutting edge
14) Add next cutting edge
15) Delete last cutting edge
16) Enable tool
17) Tool life/workpiece count
18) Tool data input
19) Delete location data
20) Help
21) Reactivate
22) Enable tool transfer
23) YES
24) NO
6FC5 197-0AA40-1BP1
9.3 Operating example turning
Unloading to
NC program
10) 11) 12)
Selected tools
20)
On the SINUMERIK 840/
840C, the help screen
form is called with the
"i" key.
Help
9 Examples
9–149