Siemens SINUMERIK 840 Planning Manual page 103

5 Configuring
5.12 FB 135 Provide D No. after tool change
The block has several signals that can be used by the operator to initiate and control the block
function and to coordinate his/her machine program.
These signals are described in the timing diagram below:
Timing diagram 1: Provide D No., measure tool at first use
Input "ST" :
DB 152 bit 3
Measure tool at
first application :
Initialization of
measuring interf. :
Output "ESP" :
Output "VG-L" :
Output "VG-B" :
Output"F" :
Data transmission
R parameter :
5–42
© Siemens AG 1991 All Rights Reserved
01.91
6FC5 197-0AA40-1BP1
SINUMERIK 840/880 (PJ)