Display "Loading Spindle" - Siemens SINUMERIK 840 Planning Manual

9 Examples

9.1.15 Display "Loading spindle"

9.1.15 Display "Loading spindle"
AUTOMATIC
Loading spindle:
T No.:
Size:
Geometry:
1200
L1:
L2: 750
R:
Spec. tool life:
Spec. tool life:
The recall key is unassigned in this display. A return to a higher menu level is possible only
with the function keys "Acknowledgment" or "Abort".
Softkey "ADD NEXT CE"
A cutting edge is added to the tool available.
A maximum of nine cutting edges is permissible.
(When selecting this function, another D No. is entered in the reference list of the spindle
location and the NC pointer positioned on it.)
Softkey "ACKNOWLEDGE"
The tool is marked as a replacement tool.
Return along the menu tree to selection display.
(The transfer includes the reference list. That is, a new D No. is entered in the loading line.)
Softkey "ABORT"
All D Nos. of the reference list of the loading line, except the first D No., are released and
removed from the reference list, i.e all cutting edges of the tool, with the exception of the first
cutting edge, are deleted.
The loading line remains unchanged with its one cutting edge. The display returns to the
selection display.
The reserved empty location in the magazine is released.
9–16
Duplo No.:
1
Type:
11
Cutting edge No.:
Wear:
Prewarning limit tool life:
743
2000
ADD
NEXT CE
© Siemens AG 1991 All Rights Reserved
1
1
1
0.005
L1:
L2: 0.002
R:
0.001
ACKNOW- ABORT
LEDGE
6FC5 197-0AA40-1BP1
SINUMERIK 840/880 (PJ)
11.92
1.1
100