Siemens SINUMERIK 840 Planning Manual page 78

11.92
Save from to: Function code: 1
Unload magazines x to y, where the following restrictions must be observed.
1 < = x < = y <= 16
Parameters:
Save chained: Function code: 2
Unloading of chained magazines starting from magazine x, the way in which
the magazines are chained is defined.
Case 1:
Case 2:
Parameters:
Save Hand marked: Function code: 3
The user can unload tools which have been marked manually
(operator panel) in DB153 with data bit 7.
Parameters: None
© Siemens AG 1991 All Rights Reserved
SINUMERIK 840/880 (PJ)
– First magazine (x) DB135 DR 18
– Last magazine (y) DB135 DL 18
Starting from magazine x up to the magazine to which no other
magazine is assigned.
Starting from magazine x up to the magazine which is again
chained with magazine x.
– Starting magazine (x) DB135 DR 18
6FC5 197-0AA40-1BP1
5 Configuring
5.5 FB 120 Unloading via tape
5–17