Caller Id/Clip; The Call List; Calling A Number From The Call List - Topcom Butler 1000 User Manual

Butler 1000

5 CALLER ID/CLIP

(This service only works when you have a Caller ID/Clip subscription. Contact your telephone
company).
When you receive a call, the telephone number of the caller, the date and time appears on the
handset display. The telephone can receive calls in FSK (name, telephone number, date &
time)* or both (FSK and DTMF) (see packaging). If the name is programmed in the Phone Book,
the name in the Phone Book is displayed!
The telephone can store 30 calls in a Call List that can be reviewed later. The telephone never
stores the same call twice. When the memory is full, the new calls automatically replace the
oldest calls in the memory. The symbol
answered. If the Call List is empty and you press the Up key
You can view the information of an incoming call as follows:
• Press the Up key
of the caller, the sequence number of the call in the Call List, the date* and time* of the call
appear on the display.
• Press the Down key
* only if the network sends the name, the date & time together with the telephone number!

5.1 The Call List

The calls received are stored in the Call List (max. 30 numbers).
• Briefly press the Up key
• The name of the most recent caller appears on the display. If no name is available, 'NO
NAME' appears on the display.
• If it is a private number, 'UNAVAL' appears on the display.
• The date and time the call was received are linked to each call*.
• B r i e fly press the Down key
• Briefly press the Down key
* only if the network sends the name, date & time together with the telephone number!
Notes :
•
If neither the Up or Down key
•
After a call is received, the number of the caller remains on the display for 15 seconds after the last ring.
•
Caller ID is not available while you are on the line.

5.2 Calling a number from the Call List

• Press the Up key
• Press the Up key
number.
• Once the number is on the display, press the Line key
(The symbols and 'EXT' appear on the display and the call timer starts.)
on the display blinks if the call is not read or n o t
. The name (if sent by the network or present in the Phone Book memory)
. The telephone number of the caller appears on the display.
to view the most recent call.
to view the telephone number of the call.
to browse other numbers on the list.
is pressed for 15 seconds, the telephone will return to standby mode.
to go to the Call List
to look up the desired call. Press the Down key
, three beep tones will sound.
and the number is dialled automatically.
68 68 68 68 68 68 68 68 68 68 68 68 68 68
to view the telephone