Barring Outgoing Calls - Topcom Butler 1000 User Manual

Topcom asia ltd. butler 1000 user's manual
Hide thumbs Also See for Butler 1000:
Table of Contents

Advertisement

Available languages

Available languages

Butler 1000
• Press the Up or Down key
• Press the Programming key
• Press the Up or Down key
• Press the Programming key
• 'BASE -' appears on the display.
• Enter the number of the base unit you want to select (1-4). Use the number keypad.
• Press the Programming key
• 'SEARCHING' and the symbol
• A signal sounds once the selected base unit has been found.
Notes :
Before you can select a base unit, the base unit must be subscribed to the handset first.
If 'NOT SUB' appears on the display, this means the selected base unit does not exist or the handset has
not been subscribed.

4.26 Barring outgoing calls

You can program the handsets to bar calls to certain telephone numbers so that for instance '00'
international numbers cannot be called. Up to 5 numbers (of max. 5 digits) can be barred.
To do this, do the following:
• Press the Programming key
• Press the Up or Down key
• Press the Programming key
• Press the Up or Down key
• Press the Programming key
• 'PIN' appears on the display.
• Enter your PIN code
• Press the Programming key
• 'BAR NUM ' appears on the display. You are in memory "1. _ _ _ _ _".
• Press the Up or Down key
• Enter the number (max. 5 digits) to be barred, e.g. 01486.
• Press the Programming key
• 'HS _ _ _ _ _' (= number on the handset (1-5)) '01486' (= the barred numbers) appear on
the display.
• Enter the numbers of the handsets from which the barred numbers cannot be called.
• e.g. Press the number key 2, 3 and 5. On the display, this will appear: HS _2 3_5 01486
These handsets can no longer dial numbers beginning with '01486'.
• Press the Programming key
Repeat the same procedure described above if you would like to bar other numbers (max. 5)!
repeatedly until 'BASE SEL' appears on the display.
.
repeatedly until 'MANUAL' appears on the display.
.
.
appear on the display.
.
repeatedly until 'SETTING' appears on the display.
.
repeatedly until 'BARRING' appears on the display.
.
.
to select one of the 5 memories.
.
to confirm your selection.
66
66
66
66
66
66
66
66
66
66
66
66
66
66

Advertisement

Table of Contents
loading

Table of Contents