Application Of The Standards - Siemens SIMATIC NET System Manual

Appendix
A.3 Application of the standards
A.3

Application of the standards

Application of the EN standards 50173/50174
Standard
EN50173-1
EN50174-1
EN50174-2
EN50174-3
EN50174-1
EN50174-2
EN50174-3
EN501714-1
Description of the fieldbus-specific characteristics in IEC 61784
This standard references IEC 61918.
Standard
IEC 61784-5-2
IEC 61784-5-3
IEC 61784-5-6
IEC 61784-5-10
IEC 61784-5-11
General-purpose cabling systems: EN 50173/EN 50174
Standard
EN50173-1
EN50173-2
EN50173-3
EN50173-4
EN50174-5
Installation of communication cabling: EN 50174
Standard
EN50174-1
EN50174-2
EN50174-3
364
Project phase
Planning of cabling
Planning phase
Implementation phase
Operational phase
Fieldbus
ControlNet, EtherNet/IP
PROFIBUS, PROFINET
Interbus
Vnet/IP (Yokogawa)
TCnet (Toshiba)
Contents
Part 1: General requirements
Part 2: Office environment
Part 3: Industrial area
Part 4: Domestic environment
Part 5: Computer centers
Contents
Part 1 Specification and quality assurance
Part 2 Installation planning and practices in buildings
Part 3 Installation planning and practices outdoors
Tasks
Topology, cables, connection technology, limit val-
ues for transmission links
Management of the cabling, safety requirements,
laying of cables, equipotential bonding)
Quality assurance, management of the cabling,
repair and maintenance
System Manual, 09/2019, C79000-G8976-C242-10
Industrial Ethernet