Scalance W1750D; Description; Features And Functions - Siemens SIMATIC NET System Manual

4.6.12

SCALANCE W1750D

4.6.12.1

Description

Figure 4-39
The controller-based SCALANCE W1750D Direct Access Point supports the IEEE 802.11ac
Wave 2 standard. The device includes a virtual controller and is suitable for centralized
management of up to 128 access points. The device uses the 4 x 4 Multi-User MIMO
antenna technology that allows data transmission at speeds of up to 1733 Mbps (gross).
The device has two installed wireless cards and 8 internal antennas. It offers two Gigabit
Ethernet interfaces, one of them can be used with PoE.
The device can be installed to the wall or ceiling without any problems by using the included
bracket. Thanks to its discreet and unobtrusive design it can be optimally integrated into any
room concept.
4.6.12.2

Features and functions

Features
The device has the characteristics shown in the following table:
Number of supported access points
PoE (Power-over-Ethernet) according to IEEE 802.3at
Type 1, previously IEEE 802.3af.
Redundant power supply
Digital input / digital output
C-PLUG/KEY-PLUG slot
USB 2.0 Type A
IP degree of protection
Operating temperature minimum
Industrial Ethernet
System Manual, 09/2019, C79000-G8976-C242-10
4.6 SCALANCE W components for the Industrial Wireless LAN
SCALANCE W1750D
SCALANCE network components
W1750D-2IA RJ45
128
●
-
-
-
●
IP20
0 °C
231