Siemens SIMATIC NET System Manual page 318

Communications processors for SIMATIC S7
8.3 Communications processors SINAUT ST7 for SIMATIC S7-300
Functions
The communications processors of this category support the following protocols:
Protocol / function
TCP/IP
DNP3
SINAUT ST1
SINAUT ST7
Modbus RTU
● Suitable / available or according to the specified standard.
The communications processors of this category have the following functions:
● Data buffering when there is a connection abort
● Configuration with SINAUT ST7 ES
Article numbers
Device Description
TIM 3V-IE Communication module for SIMATIC S7-300; 1x RS 232 interface for
SINAUT communication via WAN and 1x RJ45 interface for SINAUT
communication via an IP-based network
TIM 3V-IE Advanced Communication module for SIMATIC S7-300; 1x RS 232 interface for
SINAUT communication via WAN and 1x RJ45 interface for SINAUT
communication via an IP-based network
TIM 3V-IE DNP3 Communications module for SIMATIC S7-300; 1x RS 232 interface for
DNP3 communication via a WAN and 1x RJ45 interface for DNP3 com-
munication via an IP-based network
TIM 4R-IE Communication module for SIMATIC S7-300; 2x RS 232 interface for
SINAUT communication via WAN and 2x RJ45 interfaces for SINAUT
communication via an IP-based network
TIM 4R-IE DNP3 Communication module for SIMATIC S7-300; 2x RS 232 interface for
DNP3 communication via WAN and 2x RJ45 interfaces for DNP3 com-
munication via an IP-based network
318
TIM 3V-IE TIM 3V-IE Advanced
●
-
●
●
-
TIM 3V-IE DNP3
● ●
- ●
● -
● -
- ●
System Manual, 09/2019, C79000-G8976-C242-10
TIM 4R-IE TIM 4R-IE DNP3
●
-
●
●
-
Article number
6NH7800-3BA00
6NH7800-3CA00
6NH7803-3BA00-0AA0
6NH7800-4BA00
6NH7803-4BA00-0AA0
Industrial Ethernet
●
●
-
-
●