Standards And Certificates; Service Notes; Disposal Notes - Siemens SQN72 Series Manual

Standards and certificates

Lifetime

Service notes

Unit replacement

Disposal notes

Smart Infrastructure
Applied directives:

Low Voltage Directive

Electromagnetic compatibility EMC (immunity)
Compliance with the regulations of the applied directives is verified by the adherence to
the following standards/regulations:

Automatic electrical controls for household and similar use
Part 1: General requirements

Automatic electrical controls for household and similar
use
Part 2-14: Particular requirements for electric actuators
The edition of the standards that applies in each case can be found in the
declaration of conformity.
EAC conformity (Eurasian conformity)
ISO 9001:2015
ISO 14001:2015
OHSAS 18001:2007
China RoHS
Hazardous substances table:
http://www.siemens.com/download?A6V10883536
The actuator has a designed lifetime* of 250,000 start cycles (OFF  ON  OFF) under
load with the rated torque in the entire rotation angle range, which under normal
operating conditions in heating mode corresponds to approx. 10 years of service life
(starting from the production date given on the type label). This lifetime is based on the
endurance tests in the standard EN 298. A summary of the conditions has been
published by the European Control Manufacturers Association (Afecor) (www.afecor.org).
The designed lifetime is based on use of the actuator according to the manufacturer's
data sheet. After reaching the designed lifetime in terms of the number of burner startup
cycles, or after the corresponding usage time, the actuator must be replaced by
authorized personnel.
* The designed lifetime is not the warranty time specified in the Terms of Delivery.
When replacing an actuator, the following points must be checked and corrected if
necessary:

Correct connection to the basic unit

Assignment of functions
The unit contains electrical and electronic components and must not be disposed of
together with domestic waste. Local and currently valid legislation must be complied
with.
2014/35/EC
2014/30/EC
DIN EN 60730-1
DIN EN IEC 60730-2-14
5/20
CC1N7802en
8/11/2021