YASKAWA L1000A Series Technical Manual page 182

5.7 H: Terminal Functions
Setting 0: Speed reference bias
Setting 2: Auxiliary speed reference 1 (used as a second speed reference)
Inputs (b1-01 = 0) on page 106
Setting 3: Auxiliary speed reference 2 (used as a third speed reference)
Inputs (b1-01 = 0) on page 106
Setting 14: Torque compensation (load cell input)
Adjusting the Torque Compensation at Start on page 112.
Setting 1F: Not used (Through mode)
♦ H4: Multi-Function Analog Outputs
■ H4-01, H4-04: Terminal FM, AM Monitor Selection
Monitors on page 355
No.
■ H4-02, H4-03: Multi-Function Analog Output Terminal FM Gain and Bias
H4-05, H4-06: Terminal AM Gain and Bias
No.
Name
Name
Speed Selection Using Digital
Speed Selection Using Digital
Setting Range Default
Figure 5.31
Setting Range Default
U: