YASKAWA L1000A Series Technical Manual page 141

Switching Acceleration and Deceleration Times by Motor Selection
Accel/Decel Time 1 (И 1-П П = 7)
Switching Accel/Decel Ramps by a Speed Level
Figure 5.6
■ C1-11: Accel/Decel Switching Speed
a Speed Level on page 145.
No.
■ C1-09: Emergency Stop Ramp
No.
R a p id d e c e le ra tio n can trig g e r an o ve rvolta ge fault. The drive ou tp u t shuts o ff w hen fa u lte d a n d the m o to r coasts. S et an
a p pro pria te E m e rg e n cy Stop tim e to C 1 -09 to a vo id this un c o n tro lle d m o to r state a n d to ensure th a t the m o to r stops q u ic k ly a n d safely.
Table 5.7 Motor Switching and Accel/Decel Time Combinations
Motor 1 Selected (Terminal set to И1-ПП =16 OFF)
Accel
Parameter Name
Parameter Name
Motor 2 Selected (Terminal set to И1-ПП =16 ON)
Decel Accel
Refer to Switching Accel/DecelRamps by
Setting Range
Setting Range
5.3 C: Tuning
Table 5.7
Decel
Default
Default
<1> <1>