Cisco Catalyst IW6300 Series Hardware Installation Manual page 39

Installing the Access Point
Note
Figure 18: Assembling Access Point to Hands-Free Attach Point with Top Support Bolts
1
2
Step 12 Screw a M8 x16 bolt (with flat and lock washers) into the second bolt hole on each side of the access point.
The access point should be positioned with the LEDs on the bottom to allow viewing from the
ground and with the hinged cover facing out.
Top Support M8 x16 bolt hole
Second M8 x16 bolt hole
Cisco Catalyst IW6300 Heavy Duty Series Access Point Hardware Installation Guide
3 Hands-free attach point
Pole Mounting
31