Cisco Catalyst IW6300 Series Hardware Installation Manual page 35

Installing the Access Point
Figure 14: Pole Clamp Bracket Adjustment Hole Locations
1
To assemble the pole clamp bracket, follow these steps:
Procedure
Step 1
Position the strap brackets on the pole clamp bracket for the pole diameter you are using and secure each strap
bracket with two M8 x16 bolts (with lock washers). Tighten the bolts to 13 to 15 ft lbs (17.6 to 20.3 Nm).
Pole size indicators
• 2 to 6 inches (5.08 cm to 15.24 cm)
• 6 to 11 inches (15.24 cm to 27.94 cm)
• 11 to 16 inches (27.94 cm to 40.64
cm)
Cisco Catalyst IW6300 Heavy Duty Series Access Point Hardware Installation Guide
Assembling the Pole Clamp Bracket and the Mounting Bracket
2 Bolt holes for pole diameters
(11 to 16 inches (27.94 cm to 40.64 cm)
indicated)
27