Onboard Devices Configuration; Apm Configuration - Asus DN-300-R2 Manual

3.3.6

Onboard Devices Configuration

Setup Mouse Support [Enabled]
Configuration options: [Disabled] [Enabled]
HD Audio [Enabled]
[Enabled] Enables the HD Audio Device.
[Disabled] Disables the HD Audio Device.
Intel LAN Controller [Enabled]
[Enabled] Enables the Intel LAN controller.
[Disabled] Disables the controller.
Serial Port Configuration
The sub-items in this menu allow you to set the serial port configuration.
Serial Port 1~6 Configuration
Serial Port [Enabled]
Allows you to enable or disable the serial port (COM). Configuration options:
[Disabled] [Enabled]
Parallel Port Configuration
The sub-items in this menu allow you to set the parallel port configuration.
Parallel Port [Enabled]
Allows you to enable or disable the parallel port (LPT/LPTE).Configuration
options:
[Disabled] [Enabled]
3.3.7

APM Configuration

ErP Ready [Disabled]
Allows BIOS to switch off some power at S4/S5 to get the system ready for ErP
requirement. When set to [Enabled], all other PME options will be switched off.
Configuration options: [Enabled] [Disabled]
Restore AC Power Loss [Power Off]
[Follow AC Power]
[Power Off]
[Last State]
Power Button in S0 [Enabled]
This item allows you to enable or disable the power button in the S0 state.
Configuration options: [Enabled] [Disabled]
Wake on LAN/PCIe [Disabled]
Enables or disables the wake-on-LAN function of the onboard LAN controller or the PCIe
LAN devices. Configuration options: [Disabled] [S3] [S3/S4/S5]
Chapter 3: BIOS setup
The system goes into on state once the AC power is
restored from a power loss.
The system goes into off state after an AC power loss.
The system goes into the last state (on or off state) once
the AC power is restored from a power loss.
3-11