Internal Connectors - Asus DN-300-R2 Manual

8. USB 3.1 Gen 1 (up to 5Gbps) ports. These 9-pin Universal Serial Bus
(USB) ports are for USB 3.1 Gen 1 devices.
•
•
•
9. USB 2.0 ports. These 4-pin Universal Serial Bus (USB) ports are for USB
2.0/1.1 devices.
10. DVI-D and PLINK port. This port is for DVI-D and PLINK display devices.
2.7.2

Internal connectors

1. ATX power connectors (24-pin EATXPWR, 4-pin ATX12V)
Correctly orient the ATX power supply plugs into these connectors and push
down firmly until the connectors completely fit.
DN-300-R2 ATX power connectors
2-14
USB 3.1 Gen 1 devices can only be used for data storage.
We strongly recommend that you connect USB 3.1 Gen 1 devices to USB
3.1 Gen 1 ports for faster and better performance from your USB 3.1 Gen 1
devices.
Due to the design of the Intel
connected to the USB 2.0 and USB 3.1 Gen 1 ports are controlled by the
xHCI controller. Some legacy USB devices must update their firmware for
better compatibility.
PIN 1
300 series chipset, all USB devices
®
EATX_PWR
ATX12V
PIN 1
DC_IN GND
DC_IN GND
H310I-IM-A R2.0 ATX power connectors
DN-300-R2